Pattern forming precipitation in gels due to coupling of chemical reactions with diffusion

Precipitate-forming chemical reactions have been studied in chemically cross-linked poly(vinyl alcohol) gel medium. One of the reactive components was incorporated into the gel, the other was allowed to diffuse into it. Depending on the experimental conditions the reaction-diffusion process often results in patterns of different type. Experiments performed in tubes and in thin layers were carried out in order to investigate the effects of various factors (cross-linking density, swelling degree as well as the concentrations of the outer and inner electrolytes) on the morphologies of the precipitate patterns. It was found that precipitation occurs not only in the Liesegang bands, but also between bands. Beside Liesegang-type structures, tree-like patterns have been observed, showing a characteristic periodicity in the density profile obtained by digitalized image analyses.     

增强型延迟反馈法控制低维混沌系统的解析研究

基于时间延迟反馈控制混沌系统的方法,提出一种增强型控制方案,并利用分析延迟系统产生Hopf分支条件的方法,给出这种方案控制低维连续自治混沌系统时,在达到控制目标的条件下,控制参数的一般解析关系.将这一方案和分析方法应用到两个混沌模型中,结果表明:采用修正的方案可以明显地改善控制混沌的效果和质量;解析分析的结果与实际数值计算的结果一致. 关键词： 延迟反馈 混沌控制 Hopf分支     

Determination of the Constants of Binding of Acridine Dyes with Micelles of Sodium Dodecyl Sulfate Using the Quenching of Delayed Fluorescence by Heavy Atoms

The constants of binding dye molecules with the micelles of sodium dodecyl sulfate are determined using quenching of delayed fluorescence of acridine dyes by sodium iodide in aqueous–micellar solutions. Kinetic equations have been composed that describe the processes of deactivation of the excited states of dyes. By solving these equations at the concentration of the quencher sodium iodide corresponding to the minimum lifetime of triplet states and at the concentration of micelles corresponding to the least value of the delayed fluorescence quenching rate constants, we obtained the constants of binding dyes with micelles equal to 1.3·10⁷, 2.9·10⁷, and 3.1·10⁷ M^–1 for trypaflavine, acridine orange, and acridine yellow, respectively. We calculated the rate constants of quenching of the triplet states of the molecules of dyes by iodide ions (I ^–) that decreased in transition from trypaflavine to acridine orange and acridine yellow.     

Thermal behaviour of styrene butadiene rubber/poly(ethylene-co-vinyl acetate) blends

The thermal behaviour of styrene butadiene rubber (SBR)/poly (ethylene-co-vinyl acetate) (EVA) blends was studied by using thermogravimetry (TG) and differential scanning calorimetry (DSC). The effects of blend ratio, cross-linking systems and compatibilization on the thermal stability and phase transition of the blends were analyzed. It was found that the mass loss of the blends at any temperature was lower than that of the components, highlighting the advantage of blending SBR and EVA. The addition of compatibilizer was also found to improve the thermal stability. DSC studies indicated the thermodynamic immiscibility of SBR/EVA system even in the presence of the compatibilizer. This is evident from the presence of two different glass transition temperatures, corresponding to SBR and EVA phases in both compatibilized and uncompatibilized blends.     

接枝和交联对纳米Si02改性NR／PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅（SiO2）改性天然橡胶，聚丙烯共混型热塑性弹性体（NR/PPTPE）．研究了马来酸酐，苯乙烯，过氧化二异丙苯（MAH／St／DCP）多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响，并用SEM分析了TPE的断面形貌．结果表明：纳米SiO2和MAH／St／DCP的最佳质量分数分别为0．03和0．0375／0．0188／0．00375时，MAH／St／DCP接枝、交联改性NR／PP／纳米SiO：TPE的力学性能、耐溶剂性能和耐热变形性能最佳．MAH／St／DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联，使NR与PP两相界面结合强度明显提高，NR／PPTPE的综合性能得到明显的改善．     

辐照对聚己内酯结构和性能的影响

研究了γ 辐照对不同分子量的聚己内酯 (PCL)的力学性能、热性能、结晶行为的影响 ,在此基础上 ,研究了辐射交联后的PCL的形状记忆行为 .研究结果表明 ,PCL的分子量越大 ,辐射交联所需的凝胶化剂量越低 .溶胶分数S +S1 2 与 1 D的关系很好地符合Charlesby Pinner关系式 ,说明PCL的辐射交联属于无规交联 .剂量对PCL的力学性能影响显著 ,剂量越大 ,抗张强度和断裂伸长率下降越多 ,但分子量较高的PCL的抗张强度受剂量的影响较小 .DMA分析表明 ,聚己内酯辐照交联后的弹性模量和耐热性能显著提高 .交联度较高的PCL表现出高弹态 ,可以拉伸 ,并具有较好的形状记忆行为 .DSC分析表明 ,辐射交联使PCL的结晶度有所增加 ,但也使结晶熔点有所降低     

Calorimetric study of cross-linking polymerization of methyl methacrylate in the presence of a multimonomer

The kinetics of free-radical cross-linking polymerization of methyl methacrylate (MM) in the presence of poly[2-(10-undecenoyloxy)ethyl methacrylate] (PUDEM) as a macromolecular cross-linker has been isothermally examined within the temperature range from 85–100°C using the differential scanning calorimetry (DSC). The activation energy found for this reaction, E _a=89.3 kJ mol^–1, exceeds slightly the literature values of activation energy obtained for the mass polymerization of MM without any cross-linking agent. The activation energy has been also determined by the isoconversion method. It has been found that E _a decreases with the increase in the conversion, which may indicate a change in the reaction mechanism.This work was partly supported by the Committee for Research (KBN) in the framework of project No. 7 T08E 026 20     

Thermolysis of furoxans annulated with five-membered carbocycles in the presence of dipolarophiles

The conditions for the thermolysis of furoxans annulated with differently strained five-membered carbocycles (cyclopentafuroxan 1, norbornenofuroxan 2, and acenaphthofuroxan 3) to bis(nitrile oxides) in the presence of various dipolarophiles (diethyl acetylenedicarboxylate, benzoylformonitrile, and ethoxycarbonylformonitrile) were optimized. It was found that the reactivities of the above furoxans as sources of bis(nitrile oxides) decrease in the order 2 > 1 > 3. Among the furoxans studied, only norbornenofuroxan 2 can be recommended as a possible cross-linking reagent for polymers. The formation of di-N-oxides of 3,4-bis(cyanopropyl)-, 3,4-bis(cyanocyclopentyl)-, and 3,4-bis(cyanonaphthyl)furoxans was detected. They resulted from intermolecular cyclodimerization of bis(nitrile oxides) initially formed in the thermolysis of furoxans 1–3. Dedicated to Academician V. A. Tartakovsky on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1521–1528, August, 2007.     

Twisted penta‐Carbazole/Benzophenone Hybrid Compound as Multifunctional Organic Host,Dopant or Non‐doped Emitter for Highly Efficient Solution‐Processed Delayed Fluorescence OLEDs

A new multi‐functional penta‐carbazole/benzophenone hybrid compound 5CzBP was designed and synthesized through a simple one‐step catalyst‐free C—N coupling reaction by using 2,3,4,5,6‐pentafluorobenzophenone and carbazole as starting materials. 5CzBP is very soluble in tetrahydrofuran (THF), which brings an environmentally friendly device fabrication for solution‐processed OLEDs instead of most widely used chlorinated solvents when 5CzBP is employed as the bulk‐phase of organic host or non‐doped emitter in the emissive layer. 5CzBP exhibits thermally activated delayed fluorescence (TADF) characteristic with relatively high triplet energy of 2.60 eV and a low ΔE_ST of 0.01 eV. By using the new TADF material as organic host for another green TADF emitter, maximum external quantum efficiency (EQE) of 12.5% has been achieved in simple solution‐processed OLED device. Besides, a maximum EQE of 8.9% and 5.7% was further obtained in TADF devices based on 5CzBP as dopant and non‐doped emitter, respectively. The simultaneously acting as efficient TADF host and non‐doped TADF emitter provides the potential guidance of the future simple single‐layer two‐color white OLEDs based on low‐cost pure organic TADF materials.